Micronics PCI/ISA System Board D6-IN Manuel d'utilisateur télécharger pdf (Page 41)

M6DPi System Board Manual

Chapter 4: The BIOS Setup Utility

LBA Transfer Mode

Enabling this selection causes LBA (Logical Block Ad-

dressing) to be used in place of Cylinders, Heads and

Sectors. The default setting is Enabled.

32-Bit I/O

This category allows you to enable the 32-bit I/O function

of the PCI IDE controller. Select Disabled if your drive

will not run at this speed. The default setting is Disabled.

Transfer Mode

This category sets the transfer speeds for IDE devices.

The Standard option is the default setting. The Fast PIO

1, Fast PIO 2, Fast PIO 3 and Fast PIO 4 options are for

higher speed devices.

Smart Monitoring

This feature will monitor your hard drive and report any

problems detected. This option is automatically detected

based on the hard drive's ability to support it. This setting

cannot be changed.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 80 81

Pas de commentaire

Micronics PCI/ISA System Board D6-IN Manuel d'utilisateur Page 41