Micronics PCI/ISA System Board D6-IN Manuel d'utilisateur Page 22

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 51
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 21
3-8
Micronics M6Pi System Board Manual
Installing a PCI Peripheral Card
Micronics PCI slots accommodate all PCI peripherals which adhere to the PCI
2.0 specifications. Complete the following steps to install a PCI card:
1. Turn the computer system off and remove its cover.
2. Choose an unused PCI slot and remove the slot cover.
3. Insert the card with the bottom edge level to the slot. Never insertthe
card at an angle!
4. Carefully push the card straight down, making sure the card is inserted
fully.
5. Replace the screw which holds the card into place.
6. Replace the computer cover.
7. Read the card’s manual for additional instructions concerning installation
and software drivers.
Figure 3-3 Installing a PCI Peripheral Card
Vue de la page 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 50 51

Commentaires sur ces manuels

Pas de commentaire