Micronics PCI/ISA System Board D6-IN Manuel d'utilisateur télécharger pdf (Page 28)

M6DPi System Board Manual

Chapter 3: Installing the M6DPi

Installing the SIMMs

The M6DPi uses SIMM modules only for the i960RP

processor. To install the SIMMs, locate the memory

banks on the system board and follow the steps below:

1. Hold the SIMM so that the notched edge is aligned

with the notch on the SIMM socket (Figure 3-1).

2. Insert the SIMM at a 45 degree angle.

3. Gently push the SIMM into an upright position until

it locks into place (past the release tabs).

Figure 3-2: Installing a 72-Pin SIMM

Removing SIMMs

To remove SIMMs, follow the steps below:

1. With both thumbs (or fingers), press the release tabs

away from the socket.

2. With the SIMM free from the release tabs, lift the

module up and place in an anti-static bag or package.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 80 81

Pas de commentaire

Micronics PCI/ISA System Board D6-IN Manuel d'utilisateur Page 28