Micronics PCI/ISA System Board D6-IN Manuel d'utilisateur télécharger pdf (Page 69)

M6DPi System Board Manual

Appendix E: Updating the System BIOS

Updating the System BIOS

The Micronics system boards are designed so that the

BIOS can be reprogrammed using a BIOS file. You can

easily FLASH a BIOS by following the steps below:

1) After downloading the appropriate BIOS file from

our BBS or Website, extract it to a bootable MS-

DOS 6.X diskette.

2) Reboot your system with the MS-DOS 6.X diskette

in the A: drive. To make sure a clean DOS environ-

ment is loaded, press the F5 key while “Starting MS-

DOS” is displayed. After the system has rebooted,

the cursor will appear at the A:> prompt.

3) Now you can run the FLASH utility. The filename

should be “PHLASH.EXE.” Type this filename at

the A:> prompt (but don’t include its extension),

followed by a space and the BIOS ROM image’s

filename. This file will be included in the download

and has a file length of about 131K or 262K. For

example, to update the M6DPi to BIOS version 01,

you would type:

PHLASH M6DPi_01.ROM [ENTER]

4) After the update process has completed and the

system reboots, verify that the new BIOS version

appears on-screen. If you have problems during this

process, or if you have questions about the proce-

dure, please call Technical Support.

NOTE: If you prefer to send your system board in for the

upgrade, the Micronics RMA department offers this

service free of charge if your system board is under

warranty.

Appendix

If you

encounter

any

problems

during this

process, or

if you have

questions

about the

procedure,

please call

Technical

Support.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 80 81

Commentaires sur ces manuels

Pas de commentaire

Micronics PCI/ISA System Board D6-IN Manuel d'utilisateur Page 69

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Micronics PCI/ISA System Board D6-IN