Micronics PCI/ISA System Board D6-IN Manuel d'utilisateur télécharger pdf (Page 43)

M6DPi System Board Manual

Chapter 4: The BIOS Setup Utility

Parallel Port

The parallel port may be configured using the following

options: Disabled (No configuration), Enabled (User

configuration), Auto (BIOS configuration) and PnP

O/S (O/S configuration).

Floppy Disk Controller

The selection allows you to enable or disable the floppy

disk controller.

Integrated PCI IDE

Enables or disables the integrated Local Bus IDE adapter.

The IDE controller may be set for Primary (default) or

Disabled.

Use MP Specs

Select the Multiprocessor specification. The default set-

ting is 1.1.

Plug & Play O/S

This selection, when set to Yes, allows the system to work

with a Plug and Play operating system such as Windows

95. The default setting is No. NOTE: This selection

should be set to No when using Windows 3.1 or Windows

NT.

Reset Configuration Data

Select Yes if you want to clear the system configuration

data. The default setting is No.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 80 81

Pas de commentaire

Micronics PCI/ISA System Board D6-IN Manuel d'utilisateur Page 43